Search Results

Pressure-time variations are recorded in the intake pipe and crankcase of a motored, crankcase compression, piston ported, loop scavenged two stroke cycle engine over a range of engine speeds from 2000-7000 rpm, for several intake pipe lengths and different inlet port timings. These pressure-time histories are presented together with the results of theoretical calculations, which include unsteady flow in the induction tract. Predicted delivery ratio trends are compared with measured values over the range of engine speeds and inlet tract lengths for different inlet port timings.

Modern turbocharged diesel engines employ exhaust driven turboblowers operating at high speeds up to 100,000 rpm. The performance assessment of such units demands precise and controllable power absorption and torque measurements at these very high rotational speeds. Additionally the parameters, speed, mass flow, static and dynamic pressures and temperatures must be measured. The turbine power absorption and torque measutement present unique problems. The remaining parameters may present some difficulties but generally the problems are not so great. The design of a high speed dynamometer and the development problems encountered are described. The dynamometer has been used to establihs the performance characteristics of a C. A. V. 01 turbocharger and these are reported.

This paper attempts to illustrate some of the reflection characteristics of exhaust systems, suitable for piston ported, crankcase compression, naturally aspirated two-cycle engines. In particular, the application is even narrower, being concerned principally with those engines of the spark ignition, gasoline burning type where a high bmep is desirable. The two principal exhaust systems considered are the diffuser and the expansion chamber. Both are analyzed experimentally and theoretically and presented as measured and digitally computed pressure-time diagrams in simulated and actual engine exhaust systems. These are compared and discussed.

Measurement of pressure-time histories in the exhaust system of a naturally aspirated internal combustion engine poses some difficult instrumentation problems. This paper describes an experimental and theoretical approach in tackling this research. The exhaust system is simulated by pulses of compressed air at a frequency of up to 4000 pulses/minute, that is, a 1 cyl 4 stroke cycle engine running at 8000 rpm. The pressure-time histories are calculated by digital computer in terms of the cylinder, exhaust valve, and pipe friction characteristics and compared with the experimental pressure-transducer records at various positions in the exhaust system.

The outflow of the products of combustion from a two-stroke cycle diesel engine cylinder is examined and the numerical analysis used hitherto supplanted by a direct integration method. It is found that the equations of outflow result in a nonlinear differential equation capable of direct solution, thereby giving rapid computation of the exhaust lead, one of the most important single criteria of the overall engine design.